Shenzhen Merrytek Technology Co., Ltd.
Shenzhen Merrytek Technology Co., Ltd Intelligent Lighting Control
Add to Cart
High Efficiency 70W Outdoor LED Driver / Dimmable LED Transformer 12v
Description:
1, ML70C-PD is special for both DALI and push dimming .
2. Support Max 200vDC output
3, Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207
4, Multi output current 350mA to 700mA selectable via DIP switch.
5, Memory function: Lights returns to previous dimming level when switch off and on again, even at mains restores.
6, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
7, Maximum length of the cable, from push button to last driver is 20m
8, Press-in terminals in primary and secondary side, easy assembly
9, Protection: Short circuit / Over voltage / Over temperature
10, 5 years guaranty
Specifications
|
INPUT
| Input voltage | 220-240Vac |
| Input frequency | 50-60Hz | |
| Input current | 0.17A max | |
| Power factor | ≥0.90 | |
| Efficiency(Note1) | ≥85% | |
| Leakage current | ＜0.5mA/240Vac | |
|
OUTPUT
| Output current and load | 350mA 50-200VDC 400mA 50-175V DC 450mA 50-156V DC 500mA 50-140V DC 550mA 50-127V DC 600mA 50-117V DC 650mA 50-106V DC 700mA 50-100V DC |
| Output load range | 1x70W max | |
| Current accuracy | ±5% | |
| Dimming mode | DALI, PUSH | |
|
ENVIRONMENT
| Working temp.(Ta) | -20~50℃ |
| Surface temp.(Tc) | 75℃max | |
| Working humidity | 20~90%RH non-condensing | |
| Storage temp. | -40~80℃ | |
| Life time | ≥50000hours | |
|
PROTECTION
| Isolation class | Class II, SELV |
| Protection class | IP20 | |
| Short circuit | Protection type; auto rest | |
| Over voltage | Protection type; auto rest | |
| Over temperature | Protection type; auto rest | |
|
SAFETY&EMC
| Safety | EN61347-1 EN61347-2-13 |
| EMC | EN55015, EN61000-3-2ClassC | |
| EN61000-3-3, EN61547 | ||
| DALI interface | IEC62386-101, IEC62386-102, IEC62386-207 | |
| Approvals | CE | |
| Withstand voltage | IN-OUT:3.75KVAC/5mA/1min | |
|
NOTE | 1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp. | |
Mechanical Specification:
PUSH Dim
Short push (<0.1sec): Ignore, to avoid reaction on AC spike.
Short push (0.1~1sec): Switch on or off.
Long push (>1sec): Dimming up or down, dimming automatically stops at minimum or maximum value.
Wring Diagram: