
Add to Cart
MLC12C-P2D Sensor driver 12w 270mA integrated with sensor dimming function 88 x 68 x 28.5mm
Description
1,35 x 35mm Sensor head,user only need to open a 35 x 35mm hole on LED board.
2, Applied for silm ceiling lamp
3,Integrate Microwave sensor and dimmable led driver technology,save labour cost for installation.
4, Working mode: Auto switch on/off,or dimming by motion and ambient brightness level.
5, Output power: 12w max.
6, Output current: 270mA
7,Output voltage: 30-42Vdc.
8, HF system: 5.8GHz±75MHz,ISM wave band.
9, Transmitting power: ≤0.5mW.
10, Power consumption: ≤1w(Stand-by).
11, Detection zone(D x H): 12m x 6m.
12, Detection sensitivity: 10%,50%,75%,100% set via dip switches.
13, Hold time: 5s,90s,3min,10min set via dip switches.
14, Corridor function:0s,30s,10min,+∞ set via dip switches.
15, Daylight sensor: 5Lux,15Lux,50Lux,set via by dip switches.
16, Stand-by dimming level: 20%.
17, Mounting height: 6m max.
18, IP rating: IP 20.
Mechanical Specification
Functions
Specifications
Operating voltage | 220-240Vac, 50Hz | |
Output power | 12w max | |
Output current | 270mA | |
Output voltage | 30-42Vdc | |
Power consumption | ≤1W(standby) | |
Transmitting power | <0.5mW | |
Detection zone Max.(D x H) | 12m x 6m | |
Motion detection | 0.5~3m/s | |
Detection angle | 150°(wall installation) 360°(ceiling installation) | |
IP rating | IP20 | |
Operation Temperature | -20℃~50℃ | |
Hold time | 5s / 90s / 3min/ 10min | |
Detection sensitivity | 10% / 50% / 75% / 100% | |
Daylight sensor | 5lux / 15lux / 50lux / Disable | |
Stand-by period | 0s / 3min / 10min / Disable | |
Stand-by dimming level | 20% | |
Life time | 30,000 hours | |
Guaranty | 3 years |
Application
Slim ceiling lamp for balcony,corridor,stairways
Wire diagram