Shenzhen Merrytek Technology Co., Ltd.
Shenzhen Merrytek Technology Co., Ltd Intelligent Lighting Control
Add to Cart
MLC18C-N 18W integrated sensor LED driver for LED ceiling light , ON - OFF / Dimming
1, Stand-by power ≤1W
2, Support mounting height up to 6m Max.
3, Stand-by dimming level is optional, 10%/ 25%.
4, Working mode: Auto switch on/off or dimming by motion and ambient light level.
5, Compact size makes the drivers easy to be installed in luminaries and get more simple lighting structure.
6, Detection area, time delay, daylight threshold, stand-by dimming time and stand-by dimming level can be set via DIP switch.
7, Sensor DIM LED drivers, originally pioneered by Merrytek, are innovative products integrated with HF motion detector, daylight sensor and LED power supply.
Specifications
| Input | Operating Voltage Rage | 198-264V AC, 50Hz/60Hz |
| Rated Voltage | 220-240V AC, 50Hz/60Hz | |
| Input Current | 0.11A MAX | |
| load Power | ≥0.90 (230V full load) | |
| Stand-by Power | ≤1W | |
| Working efficiency | 85% Max.@230V AC(full load) | |
| Wiring method | Press terminal, wire diameter:0.5-0.75mm2 | |
| Output | Working Model | Constant current |
| Type of Load | LED | |
| No-load output voltage | 60V DC Max | |
| Full load power | 16W Max | |
| Load output voltage range | 24-53V DC | |
| Load output current | 300mA/350mA | |
| Wiring method | Press terminal, wire diameter:0.5-0.75mm2 | |
| Sensor Parameters | Operating Frequency | 5.8 GHz ±75 MHz,ISM Band. |
| Transmitting power | 0.5mW Max. | |
| Hold time | 5S/ 1min /5min/10min | |
| Stand-by DIM Level | 10%/25% | |
| Stand-by Period | 0S/1min /10min/ +∞ | |
| Detection Area | 50%/100% | |
| Daylight Sensor | 5Lux / 25Lux /50Lux / Disable | |
| Daylight on/off | N/A | |
| Detecting Radius | 4-6m (mounting height 3m) (see note2) | |
| Mounting Height | 6m Max. | |
| Detecting Angle | 150° (Wall mounted), 360° (Ceiling mounted) | |
| Wireless Module | Operating Frequency | N/A |
| Transmitting power | N/A | |
| Transmitting distance | N/A | |
| Modulation mode | N/A | |
| Number of coding | N/A | |
Operating Environment | Operating Temperature | -25℃…+50℃ |
| Storage Temperature | -40℃…+80℃(Humidity: 85% Non-condensing) | |
| Certificate Standards | Safety standards | EN61347-1, EN61347-2-13 |
| EMC standards | EN55015, EN61547, EN61000-3-2, EN61000-3-3 | |
| Environmental Requirement | Compliant to RoHS | |
| Certificate | CE | |
| IP Rating | IP20 | |
| Protection Class | Class II | |
| Installation | Built-in | |
| Dimension | Φ68mm, H 26mm | |
| Net Weight | 60.1g | |
| Package | Bubble bag+Clapboard + Carton(K=A) | |
| Lifetime | 30,000h @Ta 230V full load | |
Note | ||
Dimension (mm)
Wring Diagram
*The sensor is designed for connect one load only. Connect more than one loads may damage the sensor.
Structure
Detection Pattern
Ceiling mounting
Ceiling mounted height: 3m Sensitivity: 100%/50% | Ceiling mounted height: 6m Sensitivity:100%/50% |
Normal moving (Speed:1m/s) |
Normal moving (Speed:1m/s) |
Slow moving (Speed 0.3m/s) |
Slow moving (Speed: 0.3m/s) |
Wall mounting
Horizon mounted height: 2m Sensitivity: 100%/50% | |
Normal moving (Speed:1m/s) |
Slow moving (Speed 0.3m/s) |
Function
1) On/OFF Function(Stand-by period set at ‘0S’)
2) 2-step dimming function(stand-by period set at“+∞”)
3)3-step dimming function(Stand-by period set at ‘1min/10min’)
Initialization
1) On/Off function /3-step dimming function:
After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During the initialization, the sensor is not able to detect movement.
2) 2-step dimming function:
After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it dims the light to a low light level (set by stand-by dim level). During the initialization, the sensor is not able to detect movement.
Factory Setting
Detection area: 100%, Hold Time: 5S, Daylight Sensor: Disable,Stand-by DIM level:25%,Stand-by period:+∞
Application Notice
Be sure to power off before adjusting DIP switch setting.