
Add to Cart
Notice: this product is out of production, please contact our sales for the alternative products.
Microwave Motion Sensor MC616V RC North Amercian Version
Can Be Set Via MH01 Remote Control
Input | Input Voltage | 120/277V AC 50Hz/60Hz |
Rated Input Voltage | 120/277V AC 50Hz/60Hz | |
Stand-by Power | < 1W | |
Wiring Method | Lead connection Wire diameter:18AWG | |
Output | Operating Mode | ON/OFF 1-10V |
Load Power | 400W (Inductive)@120VAC 800W (Resistive) @120VAC 800W (Inductive)@277VAC 1000W (Resistive) @277VAC | |
1-10V Dimming | < 50mA (Non constant current source) | |
Wiring Method | Lead connection Wire diameter:22AWG | |
Sensor Parameters | Operating Frequency | 5.8 GHz ±75 MHz ISM wave band |
HF Radiated power | 0.5mW Max. | |
Detection Area | 100%/75%/50%/25% | |
Hold Time | 5S/30S/1min/3min/5min/10min/20min/30min | |
Stand-by Period | 0s/10S/1min/3min/5min/10min/30min/Disable | |
Daylight Sensor | 5lux/15Lux/30Lux/50Lux/100lux/150lux/Disable | |
Preset Brightness | 10%/20%/30%/50% | |
Mounting Height | 12m Max. | |
Detection Angle | 150°(Wall Mounting), 360°(Ceiling Mounting) | |
Operating Environment | Operating temperature/ humidity | -35℃....+55℃ |
Storage temperature/humidity | -40℃... +80℃ | |
Safety & EMC
| Isolation pressurization | N/A |
EMC | N/A | |
Others | Certificate requirement | FCC UL |
IP rating | IP20 | |
Protection level | N/A | |
Installation requirement | Independent side mounting | |
Installation Size | 82*82*42mm | |
Packaging requirement | Bubble Bag + Clapboard +Outer Carton (K=A) | |
Life | 50000h |
Diagram A: MC616V RC
Diagram B: MC616V RC+MS01