
Add to Cart
MLC18C-N Integrated Motion Sensor Dimmable 18W LED Driver Non-isolated
Parameters:
Input | Operating Voltage | 198-264V AC 50Hz/60HZ |
Input Voltage | 220-240V AC 50Hz/60HZ | |
Input Current | ≤0.11A (230VAC, full load) | |
Power Factor | 0.9 ( full load) | |
Efficiency | ≥86% Max.230V full load | |
Stand-by Power | ≤1W | |
Wiring Method | Shrapnel terminal | |
Output | Operating type | Constant current |
Load type | LED | |
Ripple requirement (Flickering or Flickering Free) | Flickering(But eyes cannot see the shake) | |
No-load output voltage | 63V DC Max | |
Load output voltage range | 24-53V DC | |
Full load output power | 19W Max. | |
Load output current | 300mA/350mA | |
Constant current/voltage Precision | Constant Current Precision ±5% | |
Wiring Method | Push terminal | |
Exception Protection Requirements | Output over voltage Protection | Yes |
Output over load protection | Yes | |
Output short circuit protection | Yes | |
Sensor Parameter | HF Operating Frequency | 5.8 GHz ±75 MHz,ISM wave band |
HF Radiated power | 0.5mW Max. | |
Hold Time | 5S/1min/5min/10min | |
Dimming Ratio | 10% /25% | |
Stand-by Period | 0S/1min/10min/+∞ | |
Detection Area | 50%/100% | |
Daylight Sensor | 5lux / 25lux /50lux / Disable | |
HF Detection Area | Radius 3-6m (Mounting height 3m) | |
Mounting Height: | Suggested mounting Height:3-4m , 6m Max. | |
Detection Angle | 150°(Wall Mounting), 360°(Ceiling Mounting) | |
Operating Environment | Operating temperature/ humidity | -25℃~50℃ Humidity : 85% (Non-condensing) |
Storage temperature/ humidity | -40℃~80℃ Humidity : 85% (Non-condensing) | |
Outer case max. temp(Tc) | 85℃ | |
Safety & EMC
| Isolation pressurization | (L N)input-output,3000VAC/5mA/1min |
Safety requirement | EN61347-1 | |
EMC | EN55015 | |
Certification | CE | |
Others | IP rating | IP20 |
Protection level | Class II | |
Installation size | Φ68mm,H 26mm | |
Packaging requirement | Bubble bag + clapboard + outer case(K=A | |
Life | 30000h @ Ta 100% load |
Dimension:
Wring Diagram:
Function:
Function Diagram:
Sensor Setting:
1 | |
100% | ON |
50% | -- |
2 | 3 | |
5s | ON | ON |
1min | ON | |
5min | ON | |
10min | - | - |
4 | 5 | |
5Lux | ON | ON |
25Lux | ON | |
50Lux | - | ON |
Disable | - | - |
7 | 8 | |
0S | ON | ON |
1min | ON | |
10min | ON | |
+∞ | - | - |