Shenzhen Merrytek Technology Co., Ltd.
Shenzhen Merrytek Technology Co., Ltd Intelligent Lighting Control
Add to Cart
MLC28C-N Integrated Motion Sensor Dimmable 28W LED Driver Non-isolated
Parameters:
| Input | Operating Voltage | 198-264V AC 50Hz/60HZ |
| Input Voltage | 220-240V AC 50Hz/60HZ | |
| Input Current | ≤0.17A (230VAC, full load) | |
| Power Factor | 0.9 ( full load) | |
| Efficiency | ≥88% Max.230V full load | |
| Stand-by Power | ≤1W | |
| Wiring Method | Shrapnel terminal | |
| Output | Operating type | Constant current |
| Load type | LED | |
| Ripple requirement (Flickering or Flickering Free) | Flickering(But eyes cannot see the shake) | |
| No-load output voltage | 50V DC Max | |
| Load output voltage range | 22-42V DC | |
| Full load output power | 30W Max. | |
| Load output current | 350mA/550mA/600mA/700mA | |
| Constant current/voltage Precision | Constant Current Precision ±5% | |
| Wiring Method | Push terminal | |
| Exception Protection Requirements | Output over voltage Protection | Yes |
| Output over load protection | Yes | |
| Output short circuit protection | Yes | |
| Sensor Parameter | HF Operating Frequency | 5.8 GHz ±75 MHz,ISM wave band |
| HF Radiated power | 0.5mW Max. | |
| Hold Time | 5S/1min/5min/10min | |
| Dimming Ratio | 10% /25% | |
| Stand-by Period | 0S/1min/10min/+∞ | |
| Detection Area | 50%/100% | |
| Daylight Sensor | 5lux / 25lux /50lux / Disable | |
| HF Detection Area | Radius 3-6m (Mounting height 3m) | |
| Mounting Height: | Suggested mounting Height:3-4m , 6m Max. | |
| Detection Angle | 150°(Wall Mounting), 360°(Ceiling Mounting) | |
| Operating Environment | Operating temperature/ humidity | -25℃~50℃ Humidity : 85% (Non-condensing) |
| Storage temperature/ humidity | -40℃~80℃ Humidity : 85% (Non-condensing) | |
| Outer case max. temp(Tc) | 85℃ | |
| Safety & EMC
| Isolation pressurization | (L N)input-output,3000VAC/5mA/1min |
| Safety requirement | EN61347-1 | |
| EMC | EN55015 | |
| Certification | CE | |
| Others | IP rating | IP20 |
| Protection level | Class II | |
| Installation size | Φ82mm,H 26mm | |
| Packaging requirement | Bubble bag + clapboard + outer case(K=A | |
| Life | 30000h @ Ta 100% load |
Dimension:
Wring Diagram:
Function:
Function Diagram:
Sensor Setting:
| 1 | |
| 100% | ON |
| 50% | -- |
| 2 | 3 | |
| 5s | ON | ON |
| 1min | ON | |
| 5min | ON | |
| 10min | - | - |
| 4 | 5 | |
| 5Lux | ON | ON |
| 25Lux | ON | |
| 50Lux | - | ON |
| Disable | - | - |
| 7 | 8 | |
| 0S | ON | ON |
| 1min | ON | |
| 10min | ON | |
| +∞ | - | - |