
Add to Cart
1. Features
(1) Newly designed patent needle, overcome the shortage of traditional needle antenna, no blind detection area
(2) Stable performance when mount in metal roof warehouse
(3) Slim cut-hole size, fit for tri-proof light, batten, troffer
(4) All parameters can be set by remote control
(5) Override function
(5) 5 years warranty
2. Parameters
Input | Operating Voltage | 108-305V AC 50/60Hz |
Rated Voltage | 120/277V AC 50/60Hz | |
Stand-by Power | ≤1W | |
Surge Test | L--N: 1kV | |
Output | Working Mode | ON/OFF function, 1-10V step dimming |
Type of Load | Inductive or resistive Load | |
Load Capacity | 2A @120Vac ,3A@277Vac, 3A@220-240Vac | |
Max. Surge Capacity | 30A (50%Ipeak,twidth =500uS, 230Vac full load, cold start); | |
Dim Interface | 1-10V Dimming | 1-10Vdimming |
Sensor Parameters | Operating Frequency | 5.8 GHz ±75 MHz, ISM Band. |
Transmitting power | 0.5mW Max. | |
Hold time | 5s/30s/1min/3min/5min/10min/20min/30min | |
Stand-by DIM Level | 10%(1.4-1.6V), 20%(1.9-2.1V), 30%(2.9-3.1V) , 50% (4.9-5.1V) | |
Stand-by Period | 0s/10s/1min/3min/5min/10min/30min/+∞ | |
Detection Area | 100%/75%/50%/25% | |
Daylight Sensor | 5lux/15lux/30lux/50lux/100lux/150lux/Disable | |
Detecting Radius | ≥4m(mount height 3m, moving speed 0.3m/s) | |
Mounting Height | 6m Max | |
Detecting Angle | 150° | |
Operating Environment | Operating Temperature | -25℃…+60℃ |
Storage Temperature | Temperature:-40℃…+80℃; | |
Certificate Standards | Safety standards | EN61058-1, UL60703-1 |
EMC standards | EN300440; EN301489-1; EN55015; EN61547; EN61000-3-2; EN61000-3-3; EN62479 | |
Environmental Requirement | Compliant to RoHS | |
Certificate | CE | |
Others | Input/output terminal specifications | Push-type terminal block; wire diameter: 0.75-1.5mm2 |
IP Rating | IP20 | |
Protection Class | Class II | |
Installation | Built-in installation | |
Dimension | See dimension | |
Package | Bubble bag + partition + outer box (K=A) | |
Net Weight | 61.2G | |
Lifetime | 5 years warranty@Ta 230V full load | |
Note |
3. Function
(1) On/OFF Function (stand-by period be set to “0”s)
(2) 2-step dimming function (stand-by period be set to “+∞”)
(3) 3-step dimming function (stand-by period be set to “0S/30S/10min/+∞”)
(4) Daylight priority
4.Dimension (mm)
5. Radiation pattern
(1) Ceiling mounting
(2) Wall mounting
6. Remote control