Shenzhen Merrytek Technology Co., Ltd.
Shenzhen Merrytek Technology Co., Ltd Intelligent Lighting Control
Add to Cart
M20 male side thread infrared sensor motion detector for LED triproof light IP20
1. Features
1) Designed for LED batten or tri-proof fixtures with M20 male thread.
2) Easily programming detection area, hold time, and daylight threshold by the MH10 remote control.
3) Support max. mounting height of 12m, can be used in parking lots and warehouses.
2. Parameters
| Input | |
| Operating Voltage | 220-240Vac |
| Rated Voltage | 230Vac |
| Stand-by Power | ≤0.5W |
| Surge Test | 1KV(L/N, EN61000-4-5) |
| Output | |
| Working Mode | ON/OFF |
| Load Type | Inductive Load/Resistive Load |
| Load Power | 400W@230VAC(Inductive Load),800W @230VAC(Resistive Load). |
| Load Surge Current | 30A (50% Ipeak, Twidth 200us @230Vac full load, cold start) |
| Sensor Parameters | |
| Detection Way | PIR |
| Hold Time | 5s/30s/1min/3min/5min/10min/20min/30min |
| Detection Area | 100%/75%/50%/25% |
| Daylight Sensor | 5Lux/15Lux/30Lux/50Lux/100Lux/150Lux/Disable (Diffusion) |
| Detection Range(Radius) | Ceiling Mounting at 10m high: r≥3m@0.6~1m/s
|
| Test condition: 100% sensitivity, indoors, no direct sunlight to sensor, no wind, Temperature 25℃ | |
| Mounting Height | 10m (12m Max) |
| Environment | |
| Operating Temperature | -20℃~+55℃ |
| Storage Temperature | -40℃~+80℃, humidity≤85%(Non-condensing) |
| Certificate Standards | |
| Safety (LVD) standard | EN61058-1-2, EN61058-1 |
| Surge | 1KV(L/N, EN61000-4-5) |
| EMC Standards | EN55015 |
| Environmental Requirement | Compliant to RoHS 2.0, Reach |
| Certificates | CE, RED |
| IP Rating | IP65 |
| Product classification | Class II |
| Others | |
| Wiring | Lead wire, wire diameter: 0.75mm2 |
| Installation | External side mounting |
| Package | Bubble bag + cardboard + outer carton(K=A) |
| Net Weight | 77g |
| Lifetime | 3 years warranty@Ta 230Vac full load |
3. Dimension
4. Wiring Diagram
5. Start Process & Initialization
After powering on, the sensor automatically turns on the light to 100% brightness and turns off the light in 45±5 seconds. During initialization, the sensor is not able to detect movement.
6. Factory Settings
Detection Area: 100% Hold Time: 5s Daylight Sensor: Disable
7. Detection radiation
8. Installation Instruction
10. Remote Control