12Vdc Input, suitable for DC systems or LED driver with 12V DC auxiliary power output.
0--10V dimming terminal, 3-step or 2-step is optional, detection area adjustable
Mini size MW motion detection sensor
Indoor maximum mounting height is 15m
All sensor parameters can be set by Casambi App setting

【Parameters】

Input
Rated voltage	12±1V DC
Working current	35±5mA
Ripple voltage	<100mVp-p
Output
Output signal	0 -10VDC dimming signal
Sensor parameters
Detection way	PIR
Sensor sensitivity	Casambi App setting
Daylight Priority	Casambi App setting
Stand-by dim level	Casambi App setting
Detection Area (Radius)	Ceiling installation 12m high: r≥4m@0.3m/s; r≥3m@1m/s
Installation height	10m (12m Max )
Wireless parameters
BLE Module	Casambi Bluetooth module
Working frequency	2.402-2.480GHz
Transmitting power	+7dBm(max)
Transmission distance	Point to point transmit 20m Max
Fixture ID	32022
Environment
Working temperature	-25~55℃
Storage temperature	-40℃~80℃, humidity ≤85% (non-condensing)
Certification standards
Certification	CE
Environmental requirements	Comply with RoHS 2.0 , Reach requirements
IP Rating	IP65
Other
Wiring	Zhaga Book 18 interface
Installation requirements	External
Packaging requirements	Clapboard + Carton(K=A)
Net weight	N/A
Lifetime	5 years warranty @Ta

【Function Description】

【Product Information】

【Installation Instruction】

【Detection Range】

【Initialization】

After switch on power, sensor will be warmed 45-60s then start to work. During initialization, the sensor is not able to detect movement.

【Default setting】

Sensitivity: 100%, Hold time: 10s, Daylight sensor: Disable, Stand by period: 0s, Stand by DIM level: 10%

【Application Notice】

The sensor should be installed by a professional electrician. Please turn off the power before installing, wiring and changing parameters.
PIR sensor can’t penetrate any materials, please make sure no obstacle between sensor and moving people/object.
Sensor may hard to detect people if wear thick clothes in cold winter.
Heat signals will be regarded as moving signals to trigger the sensor. Avoid facing sensor to air condition or other heating source.
Sensor is for indoor use only. Outdoor sunlight could affect the detection of sensor.
Due to continuous improvement, the contents of this instruction could be changed without prior notice.
The dimming performance could be different when work with different 0-10V drivers.
The daylight threshold is measured in a sunny environment without shadow and ambient light diffuse reflection. Ambient lux level could be different in different environment, weather, climate, time-of-day and season.
Detection distance is related to height of people, mounting height, mounting angle, working environment etc.
Given detecting area is typical value that was measured by 165cm high testers in an indoor open environment.
This product have to use with voltage-stabilized DC power supply whose input voltage is stable and ripple factor is low(ripple factor is lower than 100mV; load current is greater than 100mA).
When installing in new environment, please install and test at least 5pcs product firstly before mass installation.

Inquiry Cart 0