DC 12V input
Dry contact Esp. for solar energy garden lamp and industrial application
sensor and load are in different power supply system, voltage free
Dry contact works in normally closed mode and normally open mode
ISM Band 5.8GHz
Automatic switching based on motion and ambient light level
3 pole relay design, user can choose normally open mode or normally closed mode according to different application
Sensor data can be simply set via DIP switch.
Wide detection area, range up to 16m in diameter.
The sensor can be detected through plastic, glass and thin non-metal materials. It supplies dry contacts in normally closed mode and normally open mode. Dry contact means open or close relay without any current or voltage. It is perfect for the solar energy garden lamp or industrial control application where requires isolation between motion signal and power supply

On-off function

Specifications:

Operating voltage	12Vdc
Rated load	Power free
HF system	5.8GHz±75MHz, ISM wave band
Power consumption	≤0.5W(standby), <1W(operation)
Transmitting power	<0.5mW
Detection zone Max.(D x H)	16m x 6m
Motion detection	0.5~3m/s
Detection angle	150°(wall installation) 360°(ceiling installation)
IP rating	IP20
Operation Temperature	-35℃~70℃
Hold time	0S/30S/90S/3min/30min/+∞
Detection sensitivity	100%/75%/50%/25%
Daylight Sensor	5lux / 15lux / 50lux /Disable
Life time	50000 hours
Guaranty	5 years

Wiring:

Applications:

Stairwell, Corridor, Balcony, Pathway, etc.

Inquiry Cart 0