Solated two-stage circuit frame, full dimming and flicker-free.
Support DIP switches to set the current gear；Slide Switches to select the CC/CW/WW
Support 10.5V auxiliary power supply, with sensing split head can achieve integrated sensing function.
Equip with 0-10V dimming control port.
Suitable for various microwave sensors or wireless smart modules.

【Parameters】

Product series	MLC28CC-PD
Input
Rated voltage	220-240V AC 50Hz/60Hz
Stand-by power	≤0.5W(No Equip with sensing split head)
Surge	1KV(L/N,EN61000-4-5)
Power factor	≥0.9 (230V Max load)
Input current	≤0.16A @230VAC full load
Inrush current	≤30A(100us half-current)@230V AC
Working efficiency	≥86% (230V Max load)
Output
Working model	CC
Type of load	LED
Flick	≤5%
Constant current accuracy	Constant current accuracy ±5%
Auxiliary driver parameters	10.5VDC Current: 100mA Max
No-load output voltage	75VDC Max
Full load power	28W Max
Load current	615mA / 370mA / 230mA
Load output voltage range	230mA / 27 -45VDC 370mA / 27-45VDC 615mA /27-45VDC Note:less 45VDC
Abnormality Protection Requirements
Protection mode	Input overvoltage protection; Input no-load protection no-load protection Input short circuit protection
Environmental Requirements
Operating temperature	Built-in:-25…+60℃
Tcase-life(Tc)	70℃
Tcase-max	85℃
Storage temperature/humidity	-40℃…+80℃ Humidity: ≤85% (non-condensation)
Certificate Standards
Certificate	CE,UKCA,SAA
Environmental requirement	RoHS2.0, Reach requirement
Safety standards(LVD)	EN61347-1, EN61347-2-13
EMC standards	EN55015, EN61547, EN61000-3-2, EN61000-3-3
Withstand voltage	Primary to secondary: 3.75KVAC
IP Rating	IP20
Product Category	Class II
Others
Wiring method	Press terminal, wire diameter:0.5-1.0mm²
Installation	Built-in
Package	PE bag clapboard, carton(K=A)
Net weight	135 ±5g
Lifetime	5years warranty@Ta50/TC70℃,230V full load
Failure rate	‰0.1@4,000H；‰0.2@20,000H,000H；‰0.8@50,000H

【Product Picture】


	MLC28CC-PD

【Product Information】

Dimension (units: mm)

Wiring & Function

【Parameter Curve】

MLC28CC-PD

Life Time Curve

【Output Current Setting】

MLC28CC-PD

Output current	Voltage range	S1	S2
615mA	20-45V	ON	ON
370mA	20-45V	-	ON
230mA	20-45V	-	-

【Initialization】

After power-on, it is half bright, and after self-test, it enters the 0-10V / PWM port voltage setting brightness (suspended for full bright).

【Default settings】

Adjust the corresponding current gear according to the order or customer demand.

【Application Notice】

Please use this product in accordance with the specifications. Failure may occur if the product is used beyond the use conditions.
The product should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switches.
The load LED string must be connected first, and then turn on the input power, otherwise it may damage the LED string.
After the LED drive input is powered off, there will be residual voltage at the output end, which can be maintained for about 3 minutes.

Inquiry Cart 0